26
'13
MAYR
www.mayr.com
- 1
- 2
30
'12
Written on
New application limits for torque limiting clutches
Perfect torque limiting clutches for test stands
13
'12
Written on
Waterproof overload protection
Increased power on corrosion-protected torque limiting clutches
08
'12
Written on
Maintenance-free brakes for wind turbines
The application of safety brakes in wind turbine pitch drives requires extremely conscientious dimensioning and precise knowledge of braking torque tolerances. If these prerequisites are fulfilled, high-quality brakes will work without requiring any maintenance across their entire service lifetime.
11
'11
Written on
ROBA®-linearstop: A safety brake for dynamic linear-motion braking actions
Most of the brake elements available on the market today work purely as clamping units. They are only designed to secure the axes at a standstill, and are not suitable for dynamic braking procedures. The ROBA®-linearstop, however, is a fully adequate safety brake according to the Trade Association testing requirements. It enables reliable braking of axes in motion.
12
'11
Written on
Limiting high torques reliably. New torque limiting clutch for heavy engineering.
In addition to numerous other innovations, mayr® power transmission is to present a large disengaging torque limiting clutch for torques of up to 280,000 Nm at the Hannover Trade Fair. This large clutch for heavy engineering is combined with curved tooth couplings for the connection of two shafts.
26
'10
Written on
Innovative brake system increases safety of vertical axes
If there is a danger of falling loads on vertical axes in areas where personnel have to work, additional measures must be taken to minimise the risk of accidents. The Mauerstetten brake specialist mayr® power transmission has developed brake systems which are capable of providing safety in any critical situation occurring during vertical axes operation.
30
'10
Written on
Brilliantly constant - Hysteresis capping heads for the beverage industry
Due to the constant, impact-free slip torque, hysteresis capping heads are better suited for sealing plastic bottles and non-returnable glass bottles than permanent magnet heads. The technically advanced ROBA®-capping head components by mayr® power transmission are based on the patented ROBA®-contitorque hysteresis clutch, which has been used in the market successfully in various applications for more than 10 years.
- 1
- 2